MS Series water separators have been designed for the removal of bulk liquid condensate, water and particulate from compressed air and gases.
The MS Series have NO ELEMENTS to change because the unique centrifugal and cyclonic action removes contaminants with low pressure drop ... and maximum energy savings.
Connection sizes range from 1/4" to 3" NPT pipe sizes. Flanged Water / Moisture separators are available.
A protected auto float drain (2mm orifice) is standard for optimal and reliable removal of liquid contaminants.
Body and Housing are zero-porosity aluminum with a durable epoxy powder-coat finish.
Corrosion-resistant internal coating protects the filters and provides for a long service life.
Ideal for variable flow compressors
Suitable for all types of compressors and compressor condensate
Bulk liquid removal at any point in a compressed air system
Protection of refrigeration and adsorption dryer pre-filtration
Liquid removal from compressor inter-coolers and aftercoolers
Liquid separation within refrigeration dryers
Note: MS Separators are highly efficient. However condensate separators cannot remove oil from the air stream. Coalescing and particulate filters down stream from the MS are required to remove the fine traces of oil, water and particles. See the GT SERIES and GX SERIES of Filters.
MS NPT Series separators are available from 1/4"NPT to 3"NPT for flows from 15-1300CFM. MS Flanged Series separators are available from DN80 - DN200 flange sizes and for flows up to 8250 scfm. Larger sizes can be manufactured to meet your requirements.